DME Incorporated
Santa Fe Springs,
CA 90670,  USA
Tel (562) 921-0464
Toll Free 1-888-4DMEINC
NON-INSULATED ROOF / WALL THIMBLE

COMPACT DESIGN MEETS NFPA 37 REQUIREMENTS

FEATURES:

  • Meets or Exceeds NFPA 37 Requirements.
  • Built-in Pipe Guides Eliminate Hot Spots.
  • Designed With Structural Integrity.
  • Standard Finish High Heat Black Enamel.
  • Heavy Wall Steel Construction.
  • Custom Thimbles Available.
 24.00"  36.00 42.00 0.25 38.00 24.06 23.00 14.00 NIT2400P-5 28.00 19.00 NIT2400P-10 33.00 24.00 NIT2400P-15
PIPE / TUBE O.D. CARBON STEEL FITS 1" THRU 5" THK. WALL / ROOF FITS 6" THRU 10" THK. WALL / ROOF  FITS 11" THRU 15" THK. WALL / ROOF
A B C D E F L1 L2 PART NO. L1 L2 PART NO. L1 L2 PART NO.
  ADD TO L1 FOR PITCHED ROOF DESIGN
PITCH OUTSIDE CASE DIAMETER (INSULATED OR NON-INSULATED)
  10 12 14 16 18 20 22 24 26 28 30 32 34 34
0.5 - 12 .42 .50 .60 .67 .75 .83 .92 1.0 1.1 1.2 1.3 1.4 1.4 1.5
1.0 - 12 .83 1.0 1.2 1.4 1.5 1.7 1.8 2.0 2.2 2.3 2.5 2.7 2.8 3.0
1.5 - 12 1.3 1.5 1.8 2.0 2.3 2.5 2.8 3.0 3.3 3.5 3.8 4.0 4.3 4.5
2.0 - 12 1.7 2.0 2.3 2.7 3.0 3.3 3.7 4.0 4.3 4.7 5.0 5.3 5.7 6.0
3.0 - 12 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
4.0 - 12 3.3 4.0 4.7 5.3 6.0 6.7 7.3 8.0 8.7 9.3 10.0 10.7 11.3 12.0
5.0 - 12 4.2 5.0 5.8 6.7 7.5 8.3 9.2 10.0 10.8 11.7 12.5 13.3 14.2 15.0
6.0 - 12 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 18.0 20.0
Add Pitch to End of Part Number:
Example:  WRT1200P-15-4.0-12 is for a 4 / 12 Pitched Roof
 
Expansion Joints
Exhaust Systems
 
Flexible Metal Hose
 
© Copyright 2003, 2004 DME Incorporated. Designed by 1EZ Consulting