Distributor Login
| Expansion Joints > Exhaust Expansion Joints |  |
90 Degree Turbo Flanges
This assembly clamps directly to the turbo charger. Multi-ply bellows have very low spring forces and will protect the turbo from the piping stresses. Assemblies can be furnished with any outlet fitting required.
Universal expansion joints allow for large amounts of lateral offset that can be created by thermal expansion of the piping or misalignment. By design the multi-ply construction will absorb and isolate engine vibration....
Reducing flanges are used at the outlet side of the expansion joint to increase the flange size. This is an economical method to make a transition in size....
Tapered cones are also used to make an increase or reduction in pipe size. When making a reduction, the cone creates a smooth flow thus minimizing the back pressure....
Tube ends can be furnished in any length to accommodate the installation. Customers can easily weld their own flanges or fittings to the tube ends. DME has tube-making equipment that allows us to furnish ends in any size, thickness or alloy....
Whether your requirement is a replacement for a factory expansion joint or one custom made to your exact length, DME can help. 5" through 14" sizes are available with floating flanges and flow liners....
